Immergas 3.025469 Instruction Booklet And Warning page 6

Recess kit for flat thermal solar manifold cp4 xl / m, extension kit
Table of Contents

Advertisement

3) Posizionare la vasca di drenaggio inferiore fissandola al tetto con minimo
due viti per farla ben aderire alla superficie e tenerla ferma (aggiungere
eventuali punti di fissaggio in funzione della consistenza del tetto).
4) Posizionare la vasca superiore sovrapponendola a quella inferiore e fissarla a
quella inferiore utilizzando dei rivetti o viti autofilettanti, oppure a seconda
delle proprie esigenze direttamente al tetto (le viti di fissaggio non sono
fornite, scegliere quelle idonee in base al tipo di superficie del tetto).
N.B.: la rappresentazione dei fissaggi delle vasche di drenaggio (Fig. 5) al
tetto è un esempio non esaustivo in quanto è necessario fissare le vasche
di drenaggio in maniera tale da farle ben aderire alla superficie del tetto.
ATTENZIONE: stendere nelle zone di sovrapposizione un cordone di
materiale sigillante (non fornito) per evitare infiltrazioni di acqua.
5) Applicare i profili a "L" ai bordi delle vasche di drenaggio (Fig. 6) fissandole
con un cordone di materiale sigillante (non fornito) per evitare infiltrazioni
di acqua.
3) Position the lower drainage tank, attaching it to the roof with at least two
screws to make it adhere properly to the surface and hold it in place (add
additional fixing points according to the roof consistency).
4) Position the upper tank, overlapping it at the lower one and attach it to
the lower one using rivets or self-threading screws, or depending on the
requirements, directly to the roof (the fixing screws are not supplied, choose
suitable ones according to the type of roof surface).
NOTE: the representation of the draining tank roof fixings (Fig. 5) is a
non-exhaustive example, as the draining tanks must adhere perfectly on
the roof surface.
CAUTION: in the overlapping areas, lay a bead of sealant material (not
provided), to prevent water infiltrations.
5) Apply the "L" profiles on the edges of the drainage tanks (Fig. 6) securing
them with a bead of sealant material (not supplied) to prevent water
infiltrations.
6
5
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

3.025477

Table of Contents