12) Posizionare i 4 angolari utilizzando la dima in dotazione nel kit per un
corretto posizionamento e fissarli alle vasche di drenaggio mediante le
viti auto perforanti fornite nel kit (Fig. 36).
13) Fissare i carter superiore e inferiore (n° 2) (lato corto) utilizzando i fori
predisposti e le 6 viti auto filettanti (per ogni carter) fornite in dotazione
(Fig. 37).
37
12) Position the 4 angle sections using the template supplied in the kit for
correct positioning and attach them to the drainage tanks using the
self-threading screws screws supplied in the kit (Fig. 36).
13) Fit the top and bottom guards (2) (short side) using the pre-drilled
holes and the 6 self-threading screws (per each guard) provided (Fig.
37).
25
36