11) Posizionare i 4 angolari utilizzando la dima in dotazione nel kit per un
corretto posizionamento e fissarli alle vasche di drenaggio mediante le
viti auto perforanti fornite nel kit (Fig. 50).
12) Montare i carter laterali (lato corto) assemblandoli sugli angolari,
utilizzando le viti auto filettanti fornite in dotazione (Fig. 51).
11) Position the 4 angle sections using the template supplied in the kit for
correct positioning and attach them to the drainage tanks using the
self-threading screws screws supplied in the kit (Fig. 50).
12) Mount the side guards (short side) assembled on the angle sections,
using the self-threading screws provided (Fig. 51).
34
50
51