12) Posizionare i 4 angolari utilizzando la dima in dotazione nel kit per un
corretto posizionamento e fissarli alle vasche di drenaggio mediante le
viti auto perforanti fornite nel kit (Fig. 22).
FISSAGGIO DEL KIT ESTENSIONE
13) Assemblare il kit di estensione, per il montaggio sul lato lun-
go, regolandolo secondo le proprie esigenze (per i collettori
CP4 XL far corrispondere i fori vicini, mentre per il collettore CP4
M far corrispondere i fori lontani), unendoli mediante i rivetti in
dotazione (Fig. 23).
CP4 XL
12) Position the 4 angle sections using the template supplied in the kit for
correct positioning and attach them to the drainage tanks using the
self-threading screws screws supplied in the kit (Fig. 22).
FASTENING THE EXTENSION KIT
13) Assemble the extension kit, for assembly on the long side, adjusting
it as required (ensure that the close holes of the CP4 XL manifolds
correspond, whilst for the CP4 M manifold, the distant holes must
correspond), joining them using the rivets provided (Fig. 23).
16
22
CP4 M
23