12) Posizionare i 4 angolari utilizzando la dima in dotazione nel kit per un
corretto posizionamento e fissarli alle vasche di drenaggio mediante le
viti auto perforanti fornite nel kit (Fig. 77).
13) Assemblare i carter superiore ed inferiore regolandoli secondo le pro-
prie esigenze (per il collettore CP4 XL far corrispondere i fori vicini,
mentre per il collettore CP4 M far corrispondere i fori lontani), unendoli
mediante i rivetti in dotazione (Fig. 78).
12) Position the 4 angle sections using the template supplied in the kit for
correct positioning and attach them to the drainage tanks using the
self-threading screws screws supplied in the kit (Fig. 77).
13) Assemble the top and bottom guards adjusting them as required (ensure
that the close holes of the CP4 XL manifold correspond, whilst for the
CP4 M manifold, the distant holes must correspond), joining them
using the rivets provided (Fig. 78).
CP4 XL
CP4 M
50
77
78