Technical Specifications - UR FOG FAST 03 1C PRO PLUS Installation And Use Manual

05

TECHNICAL SPECIFICATIONS

* Industrial standard as from other
manufacturers
Weight without tanks and battery
Max fog emission in a single shot
Total fog emission capacity
Fog tanks capacity
Working time without mains power
Max power on heating system
Average power consumption "during
heating"
Heating time
Maximum consume at 12 V
Maximum power consumption at 12 V
Average batteries lifetime
Door tamper
Anti-tear off and anti-shift
In 1C version, the "empty" signal doesn't mean only that the cylinder is empty,
but also warns you that the system is in reserve.
For this reason is very important to make the "reset" only when you actually
exchange the cylinder, or you will lose the seconds counting. (See paragraph 13)
WARNING:
- Loosened ferrule can cause dropping
- Do not disconnect the machine immediately after the shot
- Change battery every 2 years
- Change the cylinder as soon as the "empty" signal appears
5
FAST 03 PRO PLUS
11,8 Kg
200 m
3
1200 m (1C) - 2400 m (2C)
3 3
2 x 600 ml (1 x 600 ml in 1C version)
about 2 hours
300 W
270 W
about 50 minutes
42 W
500 mA
Pb 2 Ah 12V
Tamper screw
Accelerometer
FAST 02 PRO PLUS
15,0 Kg
400 m
3
2400 m
3
2 x 600 ml
about 2 hours
300 W
270 W
about 90 minutes
45 W
500 mA
Pb 2 Ah 12V
Tamper screw
Accelerometer