Table of Contents
Advertisement
09
CONNECTION EXAMPLES
The diagrams and examples below are intended only for a "better understanding" of the
operation of the inputs / outputs. None of the diagrams below represents the "single scheme
to perform" as, in respect of the reference standard EN50131-8, there are precise indications
and only using all inputs and outputs on the PCB it is possible to abide by the standard.
A Example of connection of FAST PRO PLUS inputs with outputs of a standard alarm system
B Example of connection of FAST PRO PLUS inputs to an alarm with relay outputs
C Example of connection of FAST PRO PLUS inputs with outputs of an alarm with open collector outputs
D Example of connection of FAST PRO PLUS outputs to drive LEDS and / or relays
E Example of connection of FAST PRO PLUS outputs with inputs of an alarm normally opened
F Example of connection of FAST PRO PLUS outputs with balanced inputs of an antitheft
G Example of connection of FAST PRO PLUS outputs with antirobbery connection.
H Example of connection of FAST PRO PLUS outputs with relay board.
A - Example of connection of FAST PRO PLUS inputs with outputs of a standard alarm system
+
OC NPN OUT ON/OFF
+ INTERNAL SIREN
CENTRAL ALARM
In the diagram above the control panel, as example, provides to UR Fog power supply between 11 and 14V DC 250 mA max.
The ON/OFF output of this alarm is an Open Collector NPN opened when the system is off and it is stably closed to negative as
long as the system turned on.
The alarm output of the alarm is normally open and becomes positive during the alarm time.
10
+ 12V
GND
ARM
SHOOT
GND
+ 12V OUT
PUMP PRO PLUS
Advertisement
Table of Contents
