Table of Contents
Advertisement
08
DESCRIPTION OF INPUT AND OUTPUT CONNECTIONS
Shooting seconds setting
Cylinders reset
Serial bus
RS232
8
Door tamper
J 6
+
-
V
While connecting the machine to the mains power, it is
raccomended to never disconnect existing ground cable.
The fact of disconnecting or modifing existing cables voids the
warranty and can cause troubles or accidents related to the
temperature control.
Connect ground cable from the system to the screw on the
metal sheet.
INPUTS
+
-
12V power input
ARM
SHOOT Shooting input
INPUTS
-
OUTPUTS
OUTPUTS
EMPTY
PIR SENSOR
VALIDATION INPUT
FAULT
TAMPER Tamper output
CONFIRM Shot confirmation output
PIR SENSOR VALIDATION INPUT
P+ +12V for PIR power supply
P- GND for PIR power supply / COM. PIR
PV N.C. PIR
+12V power input
GND power input
Arming input
GND
Empty cylinder output
Fault output
Advertisement
Table of Contents
