Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ronix 6403
Summary of Contents for Ronix 6403
- Page 1 ELECTRIC SANDER 6403...
-
Page 2: Specifications
SPECIFICATIONS Model 6403 Power 320W Voltage 220V Frequency 50Hz No-Load OPM 14000 OPM Base Plate 185×93mm Weight 2.2Kg Abrasive paper, Accessories Sponge Pad, Plate WARNING! For your personal safety, Read and understand before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS GENERAL SAFETY RULES WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. WORK AREA - Keep your work area clean and well it. Cluttered benches and dark areas invite accidents. -
Page 4: Personal Safety
marked “W-A’ or “W”. These cords are rated for outdoor use and reduce the risk of electric shock. PERSONAL SAFETY - Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. -
Page 5: Specific Safety Rules
changing accessories, or storing the tool. Such prevention safety measures reduce the risk of starting the tool accidently. - Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hand of untrained users. - Maintain tools with care. -
Page 6: Functional Description
the operator. 4) This tool has not been waterproofed, so do not use water on the work piece surface. 5) Hold the tool firmly. 6) Ventilate your work area adequately when you perform sanding operations. 7) Use of this tool to sand some products, Paints and wood could ex- pose user to dust containing hazardous substances. - Page 7 pad, then lower the clamp lever to secure the paper. (Pre-bending paper makes attachment easier.) Repeat the same process for the other end of the base, maintaining the proper paper tension. After inserting the paper, make sure the teeth of the clamp hold it securely.
- Page 8 EFFECTIVE AND SAFE SANDING CAUTION: - Never run the tool without the abrasive paper. You may seriously damage the pad. - Never force the tool. Excessive pressure may decrease the sanding efficiency, damage the abrasive paper or shorten tool life. 1) Hold the tool firmly.
Need help?
Do you have a question about the 6403 and is the answer not in the manual?
Questions and answers