Ronix 6401 Manual
  1. Manuals
  2. Brands
  3. Ronix Manuals
  4. Sander
  5. 6401
  6. Manual

Ronix 6401 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ORBITAL SANDER
6401

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6401 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ronix 6401

Summary of Contents for Ronix 6401

  • Page 1 ORBITAL SANDER 6401...

  • Page 2: Specifications

    SPECIFICATIONS Rated voltage/Frequency 220V~240V/50HZ~60HZ Input power 300W Orbits per minute 13000/min +/- 10% Pad size 93 x 185 G.W/N.W accessories Carbon brush 1pair; Punched plate 1pcs; Dust collecting bag; Abrasive paper 1pcs; Operation Manual service book 1pcs WARNING! For your personal safety, Read and understand before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS GENERAL SAFETY RULES WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. WORK AREA - Keep your work area clean and well it. Cluttered benches and dark areas invite accidents.

  • Page 4: Personal Safety

    marked “W-A’ or “W”. These cords are rated for outdoor use and reduce the risk of electric shock. PERSONAL SAFETY - Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication.

  • Page 5: Specific Safety Rules

    reduce the risk of starting the tool accidently. - Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hand of untrained users. - Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.

  • Page 6: Functional Description

    the operator. 4) This tool has not been waterproofed, so do not use water on the work piece surface. 5) Hold the tool firmly. 6) Ventilate your work area adequately when you perform sanding operations. 7) Use of this tool to sand some products, Paints and wood could ex- pose user to dust containing hazardous substances.
  • Page 7 INSTALLING OR REMOVING THE ABRASIVE PAPER To install the abrasive paper, operate the paper clamp. Insert the paper end into the clamp. Center the paper and align the edge parallel to the pad, then lower the clamp lever to secure the paper. (Pre-bending paper makes attachment easier.) Repeat the same process for the other end of the base, maintaining the proper paper tension.
  • Page 8 EFFECTIVE AND SAFE SANDING CAUTION: - Never run the tool without the abrasive paper. You may seriously damage the pad. - Never force the tool. Excessive pressure may decrease the sanding efficiency, damage the abrasive paper or shorten tool life. 1) Hold the tool firmly.
  • Page 9 - You can get a clear working environment if you install the dust- collecting bag for using every time. - Installation method: align the entrance of bag with the exhaust port and then push into end slightly. The removal procedure is in reverse installation. ORBITAL SANDER...

Table of Contents