Ronix 6406 Manual

Ronix 6406 Manual

Orbital sander


Quick Links



Table of Contents

Summary of Contents for Ronix 6406

  • Page 1 ORBITAL SANDER 6406...
  • Page 2: Specifications

    SPECIFICATIONS Model 6406 Input power 320W Rated voltage 220V Frequency 50HZ Orbits per minute 0-12000 RPM Pad size 125 mm G.W/N.W 1.74 kg Carbon brush 1pair; 1pcs; Dust collecting accessories bag; Abrasive paper 1pc; Operation Manual service book 1pcs PARTS LIST...
  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS GENERAL SAFETY RULES WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. WORK AREA - Keep your work area clean and well it. Cluttered benches and dark areas invite accidents.
  • Page 4: Personal Safety

    marked “W-A’ or “W”. These cords are rated for outdoor use and reduce the risk of electric shock. PERSONAL SAFETY - Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication.
  • Page 5: Specific Safety Rules

    reduce the risk of starting the tool accidently. - Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hand of untrained users. - Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.
  • Page 6: Functional Description

    the operator. 4) This tool has not been waterproofed, so do not use water on the work piece surface. 5) Hold the tool firmly. 6) Ventilate your work area adequately when you perform sanding operations. 7) Use of this tool to sand some products, Paints and wood could expose user to dust containing hazardous substances.
  • Page 7 sure that it got fixed properly SWITCH ACTION CAUTION: - Before plugging in the tool, always check to see that the tool is switch trigger if you can back to original position freely. - In order to turn on the machin put the switch on the ON mode.the machin will work permanently in this situation - In order to turn off the machin put the switch on the OFF mode DIMMER...
  • Page 8 operating this machine so that you can much reduce the dust of working environment. INSTALLING THE DUST COLLECTING BAG NOTICE: Please make sure the cord is unplugged before installing or removing the dust-collecting bag. - You can get a clear working environment if you install the dust- collecting bag for using every time.

Table of Contents