OHAUS Defender 3000 Instruction Manual page 38

EN-36
PArItY
[ ]
Parity
Set the data bits and parity.
7 EVEN
= 7 data bits, even parity
7 ODD
= 7 data bits, odd parity
7 NONE
= 7 data bits, no parity
8 NONE
= 8 data bits, no parity
StOP
[ ]
Stop bit
Set the number of stop bits.
1 bIt
= 1 stop bits
bIt
2 = 2 stop bits
[H.SHAKE
Handshake
Set the flow control method. Hardware handshaking is only available for COM1 menu.
NONE
= no handshaking
ON-OFF
= XON/XOFF software handshaking
Alternate Print command
Set the alternate command character for Print.
Settings of A (a) to Z (z) are available. The default setting is P.
Alternate Tare command
Set the alternate command character for Tare.
Settings of A(a) to Z(z) are available. The default setting is T.
Alternate Zero command
Set the alternate command character for Zero.
Settings of A (a) to Z (z) are available. The default setting is Z.
[End]
End
Advance to the next menu or return to the top of the current menu.
]
Alt.P
[ ]
Alt.t
[ ]
Alt.z
[ ]
Defender 3000 Indicators