OHAUS Defender 3000 Instruction Manual page 40

EN-38
MT-Continuous
If MT-Continuous is selected, the print output will be in the MT-Continuous format.
mMt.CON
= printing occurs continuously.
Note: Refer to Appendix A for MT-Continuous format.
C.SUmM
Off = disabled
On = enabled
OH-Continuous
If OH-Continuous is selected, the print output will be in the OH-Continuous format.
Note: Refer to Appendix D for OH-Continuous format.
OH.CON
= printing occurs continuously.
lINktO
OFF = disabled
CUst1
CUst2
SICS
[ ]
SICS
OFF
= disable MT-SICS command
ON
= enable MT-SICS command
Note: Refer to Appendix B for SICS commands.
End
[ ]
End Print
Advance to the next menu or return to the top of the current menu.
[
tEmMp
Template
This sub-menu is used to define the format of the data output to a printer or computer.
CUst1
= customized printout format.
CUst2
= customized printout format.
Print template example
0.000 kg
0.300 kg G
0.000 kg
0.100 kg
mMt.Con
[ ]
OH.Con
[ ]
= print using custom 1 template.
= print using custom 2 template.
]
：
N
T
Defender 3000 Indicators