Manifold Components - AirSep AS-20 Instruction Manual

12/02
The oxygen generator provides the connections described below.
Air Inlet
The feed air inlet provides a connection for the feed air hose from the air
compressor.
Oxygen Outlet
The oxygen outlet provides a connection for the oxygen hose to the oxygen
receiver.
Condensate Drain Outlet
The condensate drain outlet provides a connection for a hose to drain condensate
from the oxygen generator filters.
4.2
Figure 4-4 below illustrates the manifold components of the oxygen generator.
The location and presence of components may vary between the various models
of generators.
Particulate Filter
Coalescing Filter
Feed Air Valves
Equalization Valves
Manual Air Inlet
Valve
Check Valves
Filter Drain Valve
4-4

Manifold Components

Figure 4-3 Manifold Components —
AS-160 and AS-250 Models
®
AirSep Corporation
Feed Air Regulator
Circuit Board
Muffler
Manual Filter outlet Valve
Waste Valves
Pressure Switch
Product Valve
Flow Controller
AS-20—1000 Instruction Manual