AirSep AS-20 Instruction Manual page 28

12/02
Model
AS-20,
AS-45
AS-80
AS-160,
AS-250
AS-450
AS-750
AS-1000
2) Install your oxygen receiver. If AirSep Corporation provided your oxygen
receiver, assemble the receiver as follows (See Figure 5-2.):
5-4
Feed Air Inlet Connection Size
¼" NPT female bulkhead fitting with a ¼" NPT
male x ¼" NPSM ball-end joint adapter
¼" NPT female bulkhead fitting with a ¼" NPT
male x ⅜" NPSM ball-end joint adapter
½" NPT female bulkhead fitting with a ½" NPT
male x ¾" NPSM ball-end joint adapter
¾" NPT female bulkhead fitting with a ¾" NPT
male x ¾" NPSM ball-end joint adapter
1" NPT Female fitting next to V-2
1" NPT Female fitting next to V-2
Table 5-1 Feed Air Connection Sizes and Hose Sizes
®
AirSep Corporation
Feed Air Hose Size
¼" ID minimum
⅜" ID minimum
½" ID minimum
¾" ID minimum
1" ID minimum
1" ID minimum
AS-20—1000 Instruction Manual