Specifications - AirSep AS-20 Instruction Manual

®
AirSep Corporation
A Appendix

Specifications

Data in this section refer to standard AS-20 through AS-1000 model oxygen
generators. The oxygen generators may use feed air at specifications outside
those shown; however, use of such feed air may require modification of the oxygen
generators at the AirSep Corporation factory to ensure the product oxygen meets
the design specifications. Consult your sales representative to determine whether
your oxygen generator requires modifications for your application.
Oxygen output:
Oxygen purity:
Oxygen dew point:
Dimensions:
Approximate weight:
Feed Air Requirements
Flow:
Pressure:
Temperature:
Power requirements:
*SCF (standard cubic foot) gas measured at 1 atmosphere and 70°F.
3
**Nm (normal cubic meters) gas measured at 1 atmosphere and 0°C.
AS-20—1000 Instruction Manual
Technical Data
AS-20
20 SCF/hr at 0–45 psig*
3
0.53 Nm /hr at 0–310 kPa**
90% minimum
-73°C (-100°F)
13 x 11 x 57 in. (W x D x H)
33 x 28 x 145 cm (W x D x H)
134 lb
61 kg
5.3 SCF/min* (0.14 Nm
90 psig (620 kPa) minimum
50°C (122°F) maximum
120 VAC, 50 Hz, Single Phase, 60 W, 0.5 Amp
120 VAC, 60 Hz, Single Phase, 60 W, 0.5 Amp
240 VAC, 50 Hz, Single Phase, 60 W, 0.25 Amp
240 VAC, 60 Hz, Single Phase, 60 W, 0.25 Amp
12/02
3
/min**)
A-1