Advertisement
Preparations for Devices
1. Power Supply: +12 ~ +48 VDC (Ex: DP-665)
2. Ethernet Hub or Switch (Ex: NS-205)
3. PC/NB: Can connect to the network and set the network
Hardware Connection
Connect the UA-2200 with the RJ-45 Ethernet port to an
Ethernet hub/switch and PC. You can also link directly the
UA-2200 to PC with an Ethernet cable.
After power is connected, please【wait 1 minute】for UA-2200
start-up procedure. When the "RUN" "PWR" lights start flashing,
it represents the boot is complete.
Hub/Switch
Ethernet
Ethernet
Cable
Cable
P.GND
PWR
LAN1
GND
VS+
Power Supply
(12 ~ 48 VDC)
Advertisement
