Advertisement
MET
In-Line Centrifugal Fan Range
Installation and Wiring Instructions
Models:-
MET100
MET125
MET150
MET200
MET250
MET315
PLEASE READ INSTRUCTIONS IN CONJUNCTION WITH THE ILLUSTRATIONS.
PLEASE SAVE THESE INSTRUCTIONS
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Manrose MET Series
Summary of Contents for Manrose MET Series
- Page 1 In-Line Centrifugal Fan Range Installation and Wiring Instructions Models:- MET100 MET125 MET150 MET200 MET250 MET315 220-240V~50Hz PLEASE READ INSTRUCTIONS IN CONJUNCTION WITH THE ILLUSTRATIONS. PLEASE SAVE THESE INSTRUCTIONS...
- Page 2 C. Ensure that the mains supply (Voltage, Frequency, and Phase) complies with the rating label. D. The Fan should only be used in conjunction with the appropriate Manrose products. E. It is recommended that the connection to the fan connecter terminals is made with flexible cable.
- Page 3 A. INSTALLATION. The unit is designed as an in-line duct fan to be positioned between lengths of ducting. Short duct runs terminating close to the fan (i.e. within 1.5m) must incorporate suitable guards unless the fan is mounted higher than 2.1m above the floor. If flexible ducting is used it should be fully extended to obtain the best results.
- Page 4 1. At intervals appropriate to the installation, the fan should be inspected and cleaned to ensure there is no build up of dirt or other deposits. The MET fans have sealed for life bearings, which do not require lubrication. Manrose Manufacturing Limited 1 Albion close, Slough, Berkshire SL2 5DT United Kingdom Email: sales@manrose.com...
Need help?
Do you have a question about the MET Series and is the answer not in the manual?
Questions and answers