Filling Tires With Liquid Procedure; Draining Liquid From Tires Procedure - Zetor Major 80 Operator's Manual

FILLING TIRES WITH LIQUID PROCEDURE

1.
by heaving the tractor relieve tire and turn the wheel valve
up (A)
2.
let out air and unscrew the valve insertion
3.
screw in the adapter for water filling, muzzle a hose for liq-
uid inlet
4.
fill the tire with a prescribed amount of liquid
5.
it is possible to use head tank (B) or you can do the filling
under pressure (C)
6.
remove the hose and unscrew the adapter for water filling
7.
screw in the insertion of a valve and inflate the tire to pre-
scribed pressure (D)
8.
after inflating screw in a protective cap on the valve
9.
fill the second tire in the same way
AUXILIARY BALLAST WEIGHTS
E556

DRAINING LIQUID FROM TIRES PROCEDURE

1. by heaving the tractor relieve tire and turn the wheel valve
2. let out air and unscrew the valve insertion, turn the wheel
3. remove remaining liquid after screwing in an adapter for fill-
4. blow the liquid out for so long that the liquid stops flowing
5. unscrew the adapter for water filling
6. screw back in the air part of valve and inflate the tire to pre-
7. screw in a protective cap to a valve
8. drain the liquid similarly also from the second tire
96
up (A)
valve down
When draining the liquid, there can be decompression
in the tire. Therefore turn the wheel a bit from time to
time to get the valve into upper position (B)!
ing with water by inlet of compressed air (C)
out through the tube of air adapter
scribed pressure (D)
E557