AnyTone AT-D878UV Operating Manual page 38

(8) TX Freq
Input the TX frequency by keypad, click the Menu key to save, press P2
key to return.
(9) Talk Around
When the TX radio and RX radio both are set up with Talk Around on, they
can communicate directly without a repeater. The analog channel will use
the RX frequency as TX/RX frequency, the RX CTCSS/DCS decode as TX
CTCSS/DCS encode.
(10)
Name
Allow reset the channel name, this function is only valid in channel mode.
(11)
TX Allow
Always: Always allow transmit
Channel Free: Allow transmit when the channel is free
Different CC: Allow transmit when receive matched signal but different color
code.
Same CC: Allow transmit when receive matched signal and same color
code.
(12) TX Prohibit
TX ON: Will allow transmit on the current channel.
TX OFF: Will not allow transmit on the current channel.
(13) Radio ID
In Digital channel, it will show the DMR ID which must be programmed in
the PC software – Digital – DMR ID list- DMR ID. Allows edit and select an
ID for the channel, each channel allows one ID.
In Analog channel, it will show the radio self ID which is programmed in PC
software – Analog –Analog Address Book – Number.
(14) Colour Code
The digital channel should have the same color code for communication as
(15) Time Slot
Set up Slot 1 or Slot 2 for the current channel.
32
9. MAIN MENU
AT-D87 8UV Digital DMR and Analog UHF/VHF Two Way Radio