3.3
Installing / Removing the Belt Clip
Installing the Belt Clip: Place the belt clip above the corresponding holes
a.
on the back of the radio, and screw it into place clockwise with the two
supplied screws.
Removing the Belt Clip:Unscrew counter-clockwise to remove the belt
b.
clip.
3.4
Installing the Additional Speaker/Microphone (Optional)
Pry open the rubber MIC-Headset jack cover and then insert the Speaker /
Microphone plug into the double jack.
8
3. PREPARATION
AT-D87 8UV Digital DMR and Analog UHF/VHF Two Way Radio