Table of Contents
Advertisement
Usage instructions Adapter & Adaptation
4
Central adapter for folding
mechanism (TRAVELER
adapter)
The following instructions are intended
for and may only be carried out by a rehabilita-
tion specialist dealer or PRO ACTIV
The product is coupled using a central adapter
on the wheelchair's folding mechanism.
Figure 1: Central adapter on folding mechanism
4.1
Assembly work on the wheelchair
In the first step, fix the centring column to the
rear middle part of the folding mechanism. To
do so, remove the M8 lens head screw (Metric
size 5 mm) that connects the back central part
of the folding mechanism with the central tube.
M8 oval head screw
Figure 2: M8 oval head screw that connects the
back central part of the folding mechanism with the
central tube (wheelchair from behind)
Place the adaptation plate with the centring
column from behind against the central part of
the folding mechanism and screw it to the cen-
tral piece and tube using the supplied cylinder
head screw M8x20 (Metric size 6 mm). Ensure
that the screw is tightened with a tightening
torque of 17 Nm and is secured using thread
locking fluid.
M8 cylinder head screw
Adaptation plate with
centring column
Figure 3: Folding mechanism with adaptation plate
and centring column (wheelchair from behind)
Centring column
Shock absorption O-ring
Figure 4: Folding mechanism with adaptation plate
and centring column (wheelchair from side)
4.2
Assembly work on adapter
The adapter has adaptation elements that are
pushed onto the fixing elements available or
assembled on the wheelchair and locked in the
adaptation position:
•
At the end of the adapter is the centring
column mount; its position is infinitely ad-
justable.
•
In the centre of the adapter is the locking
plate that can be positioned in a range of
105 mm in seven 15 mm steps and the
gap between it and the adapter tube can
be adjusted using spacers.
4
Advertisement
Table of Contents
