Table of Contents
Advertisement
Maintenance
Troubleshooting Common Problems
To check the network
Make sure the LAN cable is connected properly to the computer.
Setup the computer LAN card according to the manufacturer's specifications.
Disconnect the LAN cable, and test it using a LAN cable testing tool.
Refer to the Windows NT documentation on networking the system. The Win-
dows NT help system also contains a Networking Troubleshooter section
which will guide you through the most common networking problems.
Refer to your local IT department, or call the HP Test and Measurement Cus-
tomer Support line at (800) 452-4844.
Correct GPIB and I/O addresses for the computer and system are located in
ble 5-3 on page 5-8
There are many types of inter-office LANs. Because of this, this manual can
only give very basic troubleshooting information.
Table 5-2. Computer I/O Addresses
Table 5-3. GPIB Addresses
5-8
and
Test Set Component
Modulation Bias DAC
Switch DAC
Instrument Name
Tunable Laser Source - 1500nm
Tunable Laser Source - 1300nm
Wavelength Meter
Network Analyzer
Table 5-2 on page
5-8.
I/O Address
&h300
&h308
(Only used in dual band systems)
GPIB Address
24
23
25
16
Ta-
Advertisement
Table of Contents
