Table of Contents
Advertisement
2
Assembly
2.1 General
These guidelines provide information on the assembly of the cartridge.
WARNING:
Disassembly
Chapter 2 describes the assembly of the cartridge. Disassembly takes place in the opposite manner. Please
pay attention to the following instructions when working:
-
Always wear protective goggles when assembling the unit.
-
Use the right tools to assemble the individual components.
-
Keep the parts mentioned in a chapter together and separate them from other parts mentioned in
other chapters. This way you will have sorted all parts for the assembly of a component part as
described in a specific chapter.
-
Disassemble the parts of the station carefully. Please ensure that parts like the pressure spring do
not 'shoot off'.
-
Replace damaged or worn down parts with new parts.
Numbering
( 3 )
= Pos. 3
( 02.08 )
= Diagram 02.08
( 02.08 Pos. 3 ) = Pos. 3 of diagram 02.08
Article Numbers
The appropriate article numbers as well as the pos. number, number of items and description are stated in
the respective parts list.
Maintenance and assembly manual underground gas pressure reducing station
Maintenance manual
Non-compliance of the instructions shown in these maintenance guidelines
could result in the following problems:
- Malfunctioning of the UGPRS
- Damage to individual components
- Personal injury
Honeywell
Type: COCON26 DRA-LP/MP A/S
page 4
Advertisement
Table of Contents
