Table of Contents
Advertisement
2.4
Cover of Cartridge
The cover of the cartridge (40) closes the top of the gas regulating and safety internal component. The
monitor control is mounted later on the cover of the cartridge. The control valve (02.02 Pos. 20) of the gas
regulation station is located in the interior of the cartridge
Assembly
-
Fasten the seal ring (39) into the groove on the interior of the valve guide (10).
-
Place a seal ring (41) into the groove on the exterior.
-
Place the cover of the cartridge (40) with the concave side facing upwards.
-
Slide the valve guide onto the edge in the centre of the cartridge cover.
-
Close the valve guide with a lock ring (42) cover of the cartridge.
-
Turn over the cover of the cartridge.
-
Place the seal ring (3) into the groove on the top of the cover of the cartridge.
Put this part aside.
PARTS LIST 02.04 No. of Items
3
10
39
40
41
42
We recommend to have on stock the with * marked parts.
Diagram: 02.04
Maintenance and assembly manual underground gas pressure reducing station
Maintenance manual
(belonging to diagram 02.04)
(1)
Seal Ring
(1)
Valve Guide
(1)
Seal Ring
(1)
Cover of Cartridge
(1)
Seal Ring
(1)
Lock Ring
Honeywell
Type: COCON26 DRA-LP/MP A/S
*
8401047302134
8104004117080
*
8401050204329
8104001126260
*
8401071102149
8236050075001
page 10
Advertisement
Table of Contents
