Table of Contents
Advertisement
3.2 Test Casing
It is easy to test the station with compressed air with the test casing (see diagram 02.10) developed by
Gorter Controls B.V. Test the underground gas regulating station without dust filter, but with a regulator pilot,
monitor control, safety relief valve, outlet pressure measuring sleeves and connector piping.
Mount the dust filter after the inspection.
-
Place the test casing on a stable surface.
-
Connect the test casing with a compressed air system that delivers a minimum pressure of 0.3 bar
and a maximum pressure of 16 bar.
-
Connect the test casing outlet with a relief pipe.
The test casing is now ready for use and you can start carrying out the inspections (see chapter 3.3).
Diagram: 02.10
Maintenance and assembly manual underground gas pressure reducing station
Maintenance manual
Honeywell
Type: COCON26 DRA-LP/MP A/S
page 26
Advertisement
Table of Contents
