Table of Contents
Advertisement
CCES Install and Session Startup
For information about CCES and to download the software, go to
www.analog.com/CCES
Support Package (BSP) for CCES can be found at
http://www.analog.com/Blackfin/EZKits
Follow these instructions to ensure correct operation of the product soft-
ware and hardware.
Step 1: Connect the EZ-KIT Lite board to a personal computer (PC) run-
ning CCES using one of two options: an Analog Devices emulator or via
the debug agent.
Using an Emulator:
1. Plug one side of the USB cable into the USB connector of the emu-
lator. Plug the other side into a USB port of the PC running
CCES.
2. Attach the emulator to the header connector
the EZ-KIT Lite board.
Using the on-board Debug Agent:
1. Plug one side of the USB cable into the USB connector
(labeled
2. Plug the other side of the cable into a USB port of the PC running
CCES.
ADSP-BF533 EZ-KIT Lite Evaluation System Manual
. A link for the ADSP-BF533 EZ-KIT Lite Board
) on the EZ-KIT Lite board.
USB
Using the ADSP-BF533 EZ-KIT Lite
.
ZP4
(labeled
) on
JTAG
ZJ1
1-5
Advertisement
Table of Contents
Need help?
Do you have a question about the ADSP-BF533 EZ-KIT Lite and is the answer not in the manual?