Analog Devices ADSP-BF533 EZ-KIT Lite Manual page 12

Product Overview
• LEDs
• 10 LEDs: 1 power (green), 1 board reset (red), 1 USB (red),
6 general-purpose (amber), and 1 USB monitor (amber)
• Push buttons
• 5 push buttons with debounce logic: 1 reset,
4 programmable flags
• Expansion interface
•
PPI
SPORT0
• Other features
• JTAG ICE 14-pin header
The EZ-KIT Lite board has two flash memories with a total of 2 MB of
memory. The flash memories can be used to store user-specific boot code,
allowing the board to run as a stand-alone unit. For more information, see
"Flash Memory" on page
which can be used by the user at runtime.
s interface with the AD1836 audio codec to aid development of
SPORT
audio signal processing applications.
connector for communication with other serial devices. For information
about , see
SPORT0
The parallel peripheral interface (PPI) of the processor connects to both a
video encoder and video decoder, facilitating development of video signal
processing applications.
The UART of the processor connects to an RS-232 line driver and a DB9
male connector, providing an interface to a PC or other serial device.
Additionally, the EZ-KIT Lite board provides access to most of the pro-
cessor's peripheral ports. Access is provided in the form of a
xii
, , ,
SPI EBIU Timers2-0
,
SPORT1
1-15. The board also has 64 MB of SDRAM,
"SPORT Audio Interface" on page
ADSP-BF533 EZ-KIT Lite Evaluation System Manual
, , programmable flags,
UART
also attaches to an off-board
SPORT0
2-3.