Installation - HIKVISION TURBO HD D8T POC Series User Manual

1.2.5 Overview of Type V Camera
Enclosure
Main Body
Mounting Base
Figure 1-5 Overview of Type V Camera
1.2.6 Overview of Type VI Camera
Trim Ring
Power Cord
Figure 1-6 Overview of Type VI Camera

2 Installation

Before you start
Make sure that the device in the package is in good

condition and all the assembly parts are included.
Make sure that all the related equipment is power-off

during the installation.
Check the specification of the products for the

installation environment.
Check whether the power supply is matched with

your power output to avoid the damage.
Make sure the wall is strong enough to withstand

three times the weight of the camera, and the
mount.
If the wall is cement, insert expansion bolts before

installing the camera. If the wall is wooden, use
self-tapping screws to secure the camera.
If the product does not function properly, contact

your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.1 Installation of Type I/Type II/Type III Camera
2.1.1 Ceiling/Wall Mounting
Before you start:
The installation steps of Type I, Type II, and Type III
Camera are similar and the following takes Type I as an
example to describe the steps.
Steps:
1. Paste the drill template (supplied) to the place
where you want to install the camera.
2. Drill the screw holes on the ceiling/wall according to
the drill template.
Video Cable
Power Cord
IN DC12V
Video Cable
Clip Plate
Mounting Base
Enclosure
Main Body