Table of Contents
Advertisement
4. Take apart the junction box, and align the screw
holes of the camera with those on the junction
box's cover.
5. Install the mounting base to the junction box's cover
with three PM4 × 10 screws.
Figure 2-14 Secure Screws on Junction Box's Cover
6. Secure the junction box's body on the ceiling/wall
with four PA4 × 25 screws.
Figure 2-15 Secure the Junction Box's Body on Wall
7. Combine the junction box's cover with its body.
Figure 2-16 Combine the Junction Box's with its body
8. Repeat steps 5 to 9 of 2.2.1 Ceiling/Wall Mounting
to finish the installation.
/Ceiling
Advertisement
Table of Contents
