Identification; Nameplate - Endress+Hauser Ceraphant T PTC31 Operating Instructions Manual

Identification

2 Identification
2.1

Nameplate

To identify your device, compare the complete order code and the version information on the
delivery papers with the data on the nameplate.
Fig. 1: Explanation of the nameplate - see table below
1 Order code
2 Serial number
3 TAG number
4 TAG number
5 Release number
(change status)
!
Note!
• The release number indicates the change status of the device. A change in the last two figures
does not have any affect on the compatibility - see also section 7.
• The MWP (maximum working pressure) is specified on the nameplate. This value refers to a
reference temperature of +20 °C (68 °F) and may be applied to the device for an unlimited
time.
The test pressure (Over Pressure Limit OPL) corresponds to 1.5 times the MWP and may be
applied for a limited time only in order to avoid lasting damage.
4
Order Code:
1
Ser.-No.:
2
TAG:
3
4
Rel.: 5
6
7
p:
8
MWP:
9
6
7
8
9
10
Mat:
10
10
I out:
U:
13
1
2
4
3
Degree of protection
Degree of protection
Sensor range
Max. operating pressure
Wetted materials
Ceraphant T PTC31, PTP31, PTP35
10
11
12
L+
14
L–
P01-PTx3xxxx-18-xx-xx-xx-001
11 Electronics
12 Current output
13 Supply voltage
14 Connection diagram
15 Approvals
Endress+Hauser
15