Table of Contents
Advertisement
BEKOMAT
®
12i / 12i CO / 12i CO PN63
10.3.5 Cleaning
CAUTION
NOTE
Tools
•
Cleaning brush
1.
Decommissioning and disassembly of the BEKOMAT
2.
The BEKOMAT
is disassembled.
®
Illustration
58 | 76
Inappropriate cleaning and use of the wrong cleaning media!
Inappropriate cleaning and the use of the wrong cleaning media may result in minor injuries
as well as damage to health and damage to property.
•
Never clean the device with a dripping wet cloth.
•
Never use abrasive or aggressive cleaning agent or solvents which could damage the
outer coating (e.g. markings, type plate, corrosion protection, etc.).
•
Never clean the device with hard or pointed implements.
•
Use an anti-static, damp cloth for cleaning the outside.
•
Immediately replace any product markings (pictograms, markings) that have become
illegible.
Local hygiene regulations!
In addition to the cleaning instructions listed, any regionally applicable hygiene regulations
must be observed.
Prerequisites
•
Mild cleaning agent
•
Cotton or disposable cloth
Preparatory tasks
Cleaning work
Original installation and operation manual
Material
have been completed.
®
Description / explanation
1. Spray mild cleaning agent onto a cotton cloth or
disposable tissue until it is damp (not wet). Rub the
surfaces of the BEKOMAT
2. Clean the control-air bore and the condensate
discharge bore using a cleaning brush Ø max. = 2.5 mm
(0.09").
Protective equipment
Always to be worn:
with a damp cloth.
®
Advertisement
Table of Contents
