Single Device Connection - Beko BEKOMAT 12i Original Installation And Operation Manual

Original installation and operation manual

7.2.1 Single device connection

Illustration
1
1
Connection work - single device
2
36
50 mm (1.97 in)
6 mm
(0.23 in)
BEKOMAT
Description / explanation
1. Loosen the 4 screws [2].
2. Lift the top cover [1].
3. Raise the top cover [1] slightly and pull the terminal
clamp [36] off.
4. Remove the plug [7] and screw the cable gland
components [4, 5, 6] off the right cable gland [B].
5. Prepare the connection cable [X6].
6. Fit the cable gland components [4, 5, 6] over the
connection cable [X6].
7. Insert the connection cable [X6] into the
right cable gland [B].
12i / 12i CO / 12i CO PN63
®
41 | 76