Table of Contents
Advertisement
Original installation and operation manual
6.2 Assembly conditions
Wrong
> 10 m (32.8 ft)
Right
> 3%
> 3%
≤ 10 m (32.8 ft)
BEKOMAT
12i / 12i CO / 12i CO PN63
®
Description / explanation
Continuous slope >3 % in hoses
•
When using hoses as the feed line, ensure a
continuous slope >3 %.
•
Do not form water pockets.
Continuous slope >3 % in pipes
•
When installing the feed line pipe, ensure a
continuous slope >3 %.
•
Do not form water pockets.
Drain line version
•
Do not use shut-off valves in the drain line.
•
Only connect the BEKOMAT
line using a hose.
0 The hose compensates for assembly
tolerances, vibrations and thermal
expansion.
•
Do not install the drain line on storage or
transportation surfaces.
•
The drain line may be a maximum
of 10 m (32.8 ft) long and installed at a
maximum of 5 m (16.25 ft) rise.
0 The minimum operating pressure
increases by 0.1 bar(g) (1.5 psi(g)) per
metre of incline.
to the drain
®
35 | 76
Advertisement
Table of Contents
