Transport And Storage; Transport; Storage - Beko BEKOMAT 12i Original Installation And Operation Manual

Table of Contents

Advertisement

Original installation and operation manual

5. Transport and storage

WARNING
CAUTION
NOTE

5.1 Transport

After transporting and removing the packaging material, inspect the product for possible transport damage. If you find 
such damage, notify the carrier company, BEKO TECHNOLOGIES or one of its agents immediately.
Transport the product as follows:
Only transport the product in its original packaging.
Handle packaging and the product with care.
Note the transport weight specification and marking on the packaging.
Secure the packaging and the product against slipping and falling during transport.

5.2 Storage

Store the product and the accessories as follows:
Adhere to the storage parameters in chapter "4.2 Storage and transportation parameters" on Page 28.
Store in a closed, dry as well as frost-free room.
Store protected from external influences of the weather, direct sunlight and sources of heat.
Secure against falling over and protect against vibrations at the storage location.
Insufficient qualification!
Insufficient qualification of the personnel carrying out work on the product and accessories 
can lead to accidents, personal injury and damage to property as well as impair operation.
The work on the product and accessories described below may only be executed and
documented by skilled personnel - transport and storage.
Inappropriate transport or storage!
Inappropriate transport or storage may result in personal injury or damage to the device.
Use personal protective equipment during all work with packaging material.
Handle packaging, the product and accessories carefully.
Pack all parts impact-proof using suitable material.
Transport and handle the packaging according to the markings (note lifting gear
attachment points, the centre of gravity and alignment e.g. keep vertical, do not throw
etc.).
Only use proper means of transport and lifting equipment that is in proper working
order.
Always adhere to the permissible transport and storage parameters.
Store the product and accessories only outside of areas exposed to direct sunlight and
heat sources.
Handling packaging material!
Inappropriate disposal of packaging materials can cause environmental damage.
Dispose of the packaging material in accordance with the applicable legal requirements
and provisions of the country and place of use.
BEKOMAT
12i / 12i CO / 12i CO PN63
®
33 | 76

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bekomat 12i coBekomat 12i co pn63

Table of Contents