Original installation and operation manual
7.2.2 Connecting multiple Modbus devices (series connection)
Illustration
1
1
36
Connection work - series connection
2
50 mm
(1.97 in)
6 mm
(0.23 in)
BEKOMAT
Description / explanation
1. Loosen the 4 screws [2].
2. Lift the top cover [1].
3. Raise the top cover [1] slightly and pull the terminal
clamp [36] off.
4. Remove the plugs [7] and screw the
cable gland components [4, 5, 6] off the
right cable gland [B] and left cable gland [C].
5. Remove the dust protection pane [3].
6. Prepare connection cable [X6] and connection
cable [X7].
12i / 12i CO / 12i CO PN63
®
43 | 76