Safety; Use; Intended Use - Beko BEKOMAT 12i Original Installation And Operation Manual

Table of Contents

Advertisement

BEKOMAT
®
12i / 12i CO / 12i CO PN63

2. Safety

2.1 Use

The BEKOMAT
12i / 12i CO / 12i CO PN63, also referred to as product or BEKOMAT
®
draining condensate from low pressure systems and pressureless vacuum systems. The BEKOMAT
condensate at operating pressure with no pressure loss.

2.1.1 Intended use

Any use of this system other than the use described in this manual is hereby deemed to be non-intended and can cause a
hazard for the safety of people and the environment.
The following must be noted for intended use:
Read and follow the manual.
Only use the product and the accessories in indoor areas.
Only use the product and accessories within the operating parameters given in the technical data and the agreed
delivery conditions.
Only use the product and accessories with media which are free of caustic, aggressive, corrosive, toxic, flammable, 
oxidising or inorganic components.
In cases of doubt an analysis must be carried out.
Only use the product and accessories in surroundings where splash water is the maximum possible water exposure
that can occur. The splash water must be free of corrosive components.
Only use the product and accessories in areas which are free of toxic and corrosive chemicals and gases.
Only use the product and accessories within the piping system designed for the technical data with appropriate
connections, pipe diameters and assembly clearances
Only use the product and accessories outside potentially explosive atmospheres.
Only use the product and accessories away from direct solar radiation and heat sources as well as areas subject to
frost.
Only combine the product and accessories with the products and components named and recommended by
BEKO TECHNOLOGIES in the manual.
Adhere to the prescribed maintenance schedule.
Before using the product and the accessories, the operating company must make sure that all conditions and
prerequisites for intended use are given.
The product and the accessories have been exclusively designed for stationary use in a commercial or industrial area. All
of the assembly, installation, operation, maintenance, disassembly and disposal work described may only be performed
by qualified skilled technical personnel.
6 | 76
Original installation and operation manual
below, has been designed for
®
is able to drain
®

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bekomat 12i coBekomat 12i co pn63

Table of Contents