Beko BEKOMAT 12i Original Installation And Operation Manual page 42

BEKOMAT ® 12i / 12i CO / 12i CO PN63
Illustration
1
42 | 76
Connection work - single device
Connection cable [X6]
4
X6
B
36
2
Original installation and operation manual
Description / explanation
8. Connect the connection cable [X6] according to the
terminal diagram "4.9 Terminal diagram power control
board" on Page 32.
5
6
9. Screw the cable gland components [4, 5, 6] onto the
right cable gland [B].
10. Fit the screw terminal [36].
11. Set the top cover [1] in place and insert the screws [2].
12. Tighten the screws [2] with a torque of
0.5 Nm +0.5 Nm (0.37 ft-lb +0.37 ft-lb).