Reftek 130-MC User Manual page 48

Rev G
Configuration
Hardware Location
CAUTION:. You must remove the internal modem (and jumper) before connecting an
external modem to the serial port. Contact REF TEK for more information.
40
REF TEK 130 Multi-Channel Users Guide
96223-00-UG
By default, the 130-MC software sets it to 57,600 baud, no parity, 8 data bits, and 1 stop bit.
The baud rate can be user configured.
This port is accessible at the NET connector on the faceplate.
5/14/2021
Reftek Systems Inc.