Table of Contents
Advertisement
Installation of non-adjustable O-Ring Bosses (ORB) connectors
Non-adjustable port connectors are commonly found on
straight connectors, which do not require the installer to
adjust the orientation of the connection.
NOTICE: Teflon coated O-rings do not require lubrication.
For connections which are made into aluminum manifolds
or with stainless steel connectors, it may be required to
apply a lubricant to prevent galling.
1. Remove protective connector caps only immediately
prior to assembly.
2. Inspect the components to ensure that the male and
female port threads and sealing surfaces are free of
burrs, nicks, and scratches, or any foreign material.
Do not use if impurities are found.
3. Install the connector by hand.
4. Tighten to the proper torque. See the torque tables for
the proper torque value.
INTRODUCTION
48048569 26/04/2017
25
2
RAIL15TLB0538AA
Advertisement
Table of Contents
