Safety Rules - Do Not Operate Tag - New Holland D150C Service Manual

Safety rules - Do not operate tag

D150C
WARNING
Maintenance hazard!
Before you start servicing the machine, attach a DO NOT OPERATE warning tag to the machine in a
visible area.
Failure to comply could result in death or serious injury.
Attach a DO NOT OPERATE (TAG) to the machine in an area that is clearly visible whenever the machine is not
operating properly and/or requires service.
Complete the tag information for the "REASON" the tag is attached by describing the malfunction or service required.
Validate the reason for attaching the tag by signing your name in the designated area on the tag.
The tag should only be removed by the person who signed and attached the tag, after validating the repairs or services
have been completed.
(A)
(B)
(C)
Tag Components
A. DO NOT REMOVE THIS TAG! - (Warning) The tag should only be removed by the person who signed and at-
tached the tag, after validating the repairs or services have been completed.
B. See Other Side - (Reference to additional information on opposite side of the tag.)
C. CNH Part Number - (Request this part number from you Service Parts Dealer to obtain this DO NOT OPERATE
tag.)
D. DO NOT OPERATE - (Warning!)
E. REASON - (Area for describing malfunction or service required before operation.)
F. Signed by - (Signature area - to be signed by the person validating the reason for installation of the tag.)
INTRODUCTION
ANZ --- APAC --- LA --- MEA
1
87358697
48048569 26/04/2017
8
W0004A
(D)
(E)
(F)