Angelo Decor Kensington AD93413 Instructions

Kensington Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and
arrange all parts.
Attach the included tubing
to the top part.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Ensure the foam insert
that holds the light at the
bottom is positioned as
shown.
Pass the tubing into the
body of the fountain and
lower the top part in place
as shown.
IMPORTANT: to prevent water loss, create
a drip-loop with the light cords by dipping
them into the reservoir before they exit out
the back of the fountain.
Align the cords then install the pump
access door.
Retrieve the light
connection from inside the
fountain. This should not
be submerged.
Locate the tubing from
inside the fountain and
connect it to the pump.
Place the pump inside the
fountain.
AD93413
Attach the cord from the
light connection to the
transformer.
Printed in China