Angelo Decor Amphora Instructions

Available languages

Amphora Fountain

We hope you will find these instructions helpful in setting up your product.

If you have any issues with this item, DO NOT return the unit to place of purchase.

Please visit our web site www.angelodecor.com for assistance and warranty information.

Unpack and arrange all

parts.

The accent light comes pre-installed.

Carefully remove the protective wrap.

Fill with clean water and plug into a grounded GFCI outlet.

The pump must be fully submersed at all times to avoid pump burnout.

Product must be properly stored for winter.

Carefully remove the protective wrap from all parts.

For your convenience, an additional lens and bulb have

been included in the package.

Locate the tubing from inside the

fountain and attach it to the pump.

Place the pump inside the

Align the cord and install the

pump access door.

fountain.

AD93158

Securely attach the cord

to the transformer.

Table of Contents

Need help?

Do you have a question about the Amphora and is the answer not in the manual?

Page 1 Amphora Fountain AD93158 We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty information.
Page 2 Fontaine Amphora AD93158 Nous espérons que vous trouverez ces instructions utiles en assemblant votre produit. Si vous avez n'importe quelles issues avec cet article, ne renvoyez pas l'unité à l'endroit de l'achat. Veuillez visiter notre site Web www.angelodecor.com pour l'information d'aide et de garantie.

Ad93158