Function Key Settings - Canon DR-5060F Instructions Manual

Function Key Settings

Twelve function keys are located at the top of the operation panel. The following
functions can be registered to these keys. Pressing a specific key calls up the
function registered to that key.
1
E
The following settings can be registered to the function keys. Functions are
registered to function keys in the application. For details on how to register
settings to function keys, refer to the separate "ISIS/TWAIN Driver Instructions" or
"Scanning Utility 5060 Instructions."
Manual Thickness Adjustment (See P. 53)
Fixed Thickness Mode
Double Feed Detection
Imprinter
Film Density
Odometer Indication
Page Address Indication
File Address Indication
Restore Memorized Setting
MEMO
Default settings are as follows:
Function key 1: Manual Thickness Adjustment
Function key 2: Fixed Thickness Mode
Function key 3: Double Feed Detection
Function key 4: Not registered
Function key 5: Not registered
Function key 6: Not registered
Details of functions registered to each function key are saved on the
scanner. Note that these details will revert to their defaults if the scanner is
submitted for repair.
52
Setting Scan Conditions
2 3 4
Space/Trailer
FILM F
Count Only
New File
Scanner
Feeding Option
A
5 6
Backup
Manual
Auto
Semi-Auto
(See P. 54)
(See P. 54)
(See P. 55)
(See P. 55)
(See P. 55)
(See P. 55)
(See P. 55)
(See P. 55)
Function keys