Canon DR-5060F Instructions Manual page 74

Canon document scanner instructions dr-5060f
Hide thumbs Also See for DR-5060F:
Table of Contents

Advertisement

Error code
Cause
Remedy
Error code
Cause
Remedy
Error code
Cause
Remedy
Error code
Cause
Remedy
Error code
Cause
Remedy
Error code
Cause
Remedy
Error codes
Cause
Remedy
Error code
Cause
Remedy
72
When an Error Code is Displayed
H02
Endorser (option) connection error
Connect the endorser properly.
H03
The imprinter ink cartridge is not mounted, or an endorser
connection error has occurred.
Attach the ink cartridge or endorser properly.
J18
A document was skewed.
Remove the jammed document from the scanner, and check which
was the last scanned image.
LP
The lamp has reached the end of its service life.
Contact a Canon service department, and replace the lamp.
U01
The number of document sheets to be scanned exceeds the
set number of sheets in the verify scan.
Two or more sheets may have been fed simultaneously when the
number of sheets is counted. Press the Stop key to reset the
counter to the set number of document sheets. Check the number
of sheets to see if all document sheets have been counted, and
scan the document again.
U02
The number of scanned document sheets is less than the set
number of sheets in the verify scan.
Two or more sheets may have been fed simultaneously when the
document is scanned. Press the Stop key to reset the counter to
number of insufficient document sheets. Check the number of
scanned images with the number of document sheets to see if all
document sheets have been correctly scanned, and scan the
document again.
P00, P01, P02, P04, P06, P10, P20
Scanner paper jam
Remove the jammed paper. (See "Paper Jam in the Paper Eject
Section" P. 61)
P30
Endorser paper jam
Remove the paper jammed from inside the endorser according to
the Endorser Instructions.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5060f - document scanner

Table of Contents