How to enter the scanner settings via your
browser
You can use a web interface to administrate your scanner settings (example: name or
protection).
Connect your scanner to a computer via Wi-Fi. The two devices are now connected
1
point-to-point.
Open a browser on your computer and enter the primary IP address http://
2
192.168.200.1/. You can see the information menu about the hardware and about
the wireless Access Point.
Click Login (button in the upper right corner of the window). A login window is
3
shown.
Enter the primary login name: admin, and the primary password: admin. Click OK.
4
You now have access to the 'Web manager' interface.
Once you are logged in, two additional tabs are available from the left menu.
5
1.
the device management tab. You can change your login and password to this
web interface.
Page 24