Cisco ONS 15540 ESPx Installing page 8

Installing the Chassis
Secure the cable management tray to the rack with four number 12-24 screws, two
Step 6
on each side. To ensure correct placement of the tray, install the second of the two
screws in the sixth slot from the bottom of the chassis rack up on each side of the
cable management tray. (See
Note
Step 7 Attach the top cable management guide to the chassis just above the slots using
the number 12-24 screws. Make sure the grounding holes are visible through the
top cable management guide.
Cisco ONS 15540 ESPx Hardware Installation Guide
2-8
Figure
Test the cable management tray placement before cabling up the system.
Chapter 2 Installing the Cisco ONS 15540 ESPx
2-3.)
78-16436-01