Cisco ONS 15540 ESPx Installing page 44

Powering Up the Shelf
Figure 2-24 Tightening the Attachment Plates
Ensure that all site power and grounding requirements described in the Regulatory
Step 6
Compliance and Safety Information for the Cisco ONS 15500 Series have been
met before you connect the external power supply to a power source.
Step 7 Plug one end of the two-pin Molex cord into the external power supply. (See
Figure
Cisco ONS 15540 ESPx Hardware Installation Guide
2-44
2-25.)
Chapter 2 Installing the Cisco ONS 15540 ESPx
Attachment plate
shown in up position
+ -
INPUT OK OUTPUT OK
78-16436-01