Cisco ONS 15540 ESPx Installing page 28

Installing and Removing Modules
Step 3
Step 4
Removing SFP Optics with LC Connectors
Step 1
Step 2
Cisco ONS 15540 ESPx Hardware Installation Guide
2-28
Use the tool to remove the SFP by inserting the tool into the side of the module
and pulling it out. (See
Place the removed SFP in a container appropriate for shipping and storage.
To remove an SFP with an LC connector from the Type 2 extended range
transponder module, follow these steps:
Remove the cable from the desired SFP.
Remove the SFP from the module by pulling the latch on top of the SFP to release
it from the module. (See
Chapter 2
Figure 2-12.)
Figure 2-13.)
Installing the Cisco ONS 15540 ESPx
78-16436-01