Cisco ONS 15540 ESPx Installing page 56

Chapter 2 Installing the Cisco ONS 15540 ESPx
Powering Up the Shelf
Figure 2-36 Connecting the DC Power Cables
Installing and Connecting the 15540-ACPS-N-E External Power Supply
After you have installed the 15540-ACPS-N-E external power shelf in the
equipment rack, you can install the external power supplies. If you have not
installed the external power shelf, see the "Rack-Mounting the 15540-ACPS-N-E
External Power Shelf" section on page 2-50.
To install the 15540-ACPS-N-E power supply, follow these steps:
Use a flat blade screwdriver to push in on the release handle latch until the release
Step 1
handle opens. (See Figure 2-37.)
Cisco ONS 15540 ESPx Hardware Installation Guide
2-56
78-16436-01